HPI Racing 1/10 RS4 Sport 3 & Drift Flux EMH-3S Brushless ESC

• Flux EMH-3S Brushless ESC (Part # 112851)
  • Three (3) Running Modes
    • Racing: Forward Only
    • Bashing: Forward, Brake and Reverse
    • Rock Crawler: Instant Switch from Forward to Reverse
  • Eight (8) Step Drag Brake Adjustment, 0-100%
  • SIx (6) Auto LiP Cut-off Settings
  • Nine (9) Punch Start Mode Settings from Soft to Aggressive
  • Four (4) Steps of Maximum Brake Force Adjustment from 25-100%
  • Four (4) Steps of Maximum Reverse Force Adjustment from 25-100%
  • Three (3) Steps of Initial Brake Force Adjustment from 0-40%, plus the option to make IBF Equal Drag Brake Settings
  • Three (3) Steps of Neutral Range Adjustment from 6-12%
  • Eight (8) Steps of Motor Timing Adjustment from 0-26.25 Degrees
  • Overheat Protection
  • Multiple Protection, Auto LiPo Protection, Low Voltage Cut-off, Throttle Signal Loss
  • Dean's Ultra Male Battery Connector
  • Bullet Motor Connectors
  • On/Off Switch, Receiver Connector, Cooling Fan
  • Specifications:
    • Constant Current: 80A
    • Burst Current: 540V
    • Resistance: 0.0004 Ohm
    • Battery Limit: 4-9 Cells NiMH or 2-3S LiPo
    • Motor Limit:
      • 2S LiPo or 6 Cell NiMH: On-Road 5.5T, Off-Road 6000kV
      • 3S LiPo or 9 Cell NiMH: On-Raod 8.5T, Off-Road 4000kV
    • Motor Type: Sensorless, Brushless
    • BEC: 6V/2A
    • Dimensions: 2.0x2.2x1.4" (50.5x56.2x35.4mm)

Compatible with the #101856 2 in 1 Program Card, not Included, sold separately.

No term warranty provided by Dollar Hobbyz. No liability shall be assumed nor accepted for any damages, losses or costs resulting from the use of this ESC.