HPI Racing 1/10 Blitz Flux Flux EMH-3S Electronic Speed Control ESC

• Flux EMH-3s Brushless ESC (Part # 112851)
  • Designed to be used with the Flux MMH 4000kV Brushless Motor (Part # 106768)
  • Waterproof, Dust Proof
  • Three Running Modes:
    • Racing (Forward and Brake)
    • Bashing (Forward, Brake and Reverse)
    • Rock Crawler (Instant Switch from Forward to Reverse)
  • Eight (8) Step Drag Brake Adjustment from 0-100%
  • Six (6) Auto LiPo Cut Off Settings, None or 2.5-3.4V per Cell
  • Nine (9) Punch Start Mode Settings from Soft to Aggressive
  • Input Battery LiPo: 2s - Punch Start Mode Settings from Soft to Aggressive
  • Four (4) Steps of Maximum Brake Adjustment from 25-100%
  • Four (4) Steps of Maximum Reverse Force Adjustment from 25-100%
  • Three (3) Steps of Initial Brake Force Adjustment from 0-40% plus Option to make IBF Equal Drag Brake Setting
  • Three (3) Steps of Neutral Range Adjustment from 6-12%
  • Eight (8) Steps of Motor Timing Adjustment from 0-26.25 Degrees
  • Overheat Protection
  • Multiple Protection, Auto LiPo Protection, Low Voltage Cutoff, Throttle Signal Loss
  • 13AWG Battery Leads
  • Deans Ultra Male Connector
  • Universal Receiver Connector
  • 4mm Female Motor Connectors
  • On/Off Switch
  • Specifications:
    • Constant Current: 80A
    • Burst Current: 540A
    • Resistance: 0.0004 Ohm
    • Maximum Battery Input 3s, 11.1v
    • Motor Limit:
      • 2S LiPo: Off Road, 60900kV
      • 3S LiPo: Off Road 4000kV
    • BEC: 6V/2A
    • Dimensions: 2.0x2.2x1.4" (50.5x56.2x35.4mm)

Buyer agrees to contact manufacturer for all warranty replacements. No term warranty provided by Dollar Hobbyz. No liability shall be assumed nor accepted for any damages, losses or costs resulting from the use of this esc.